Request a Quote
Photograph of a red American Class 8 Kenworth tractor coupled to a white refrigerated semi-trailer, full side view — the trucks and trailers DOT air brake fittings are made for

DOT Air Brake Fittings for Trucks & Trailers, Built to Standard — PTC, Push-In, Nylon & Copper

These fittings live on the truck: on the tractor's air tanks, valves and brake chambers, across the red-and-blue coiled lines at the tractor–trailer coupling, and all over the trailer — relay valves, spring brakes, ABS modulators and air suspension. Eight fitting families in the model systems North American and Australian truck and trailer buyers already stock — D.O.T. composite push-to-connect (PTC & PTCR), brass DOT push-in in the 1562-DOT system, nylon- and copper-tubing compression, hose barb, push-on and SAE pipe & 45° flare — supplied by WAVE from Zhuji, China, as a replacement for Parker PTC and Parker Legris DOT ranges.

Class 8 tractors & semi-trailersFMVSS 571.106SAE J844 Type A & B tubingSAE J2494 / J2494-3Tube 5/32″–3/4″NPT / NPTF 1/8″–1/2″
Browse ProductsSearch a Part Number
1
Cut the tube squareCut the truck or trailer's SAE J844 nylon tubing square and clean — no burrs, no angled cuts.
2
Push in until it seatsPush the tube through the collet until it bottoms on the tube support — that is the seal, at the valve, tank or brake chamber.
3
Pull to check, then pressure-testA firm pull confirms the grip; charge the tractor and trailer air system and leak-check before the rig rolls.
Built to standard — not “certified” on paper we can't show:FMVSS 571.106SAE J844SAE J246SAE J2494 / J2494-3SAE J1131Test documents available on inquiry — ask us, we send what we actually hold.

Shop by fitting family — 8 categories

Organised the way US truck-parts distributors organise them: by tubing type and function — the same families fitted on tractors and trailers across North America and Australia. Each photo is one representative photo of its series/type — the sizes for the type live in the category specification table, not in the photo. Open a category for its introduction, spec table and full product list.

Where DOT fittings work on the truck & trailer

A DOT air brake system is a chain of air components from the compressor to the last brake chamber — and every joint in that chain is a fitting. This is where the families on this site are fitted, on tractors, semi-trailers, straight trucks and dollies.

Tractor

On the tractor — supply & control

Air dryer and governor outlets, air reservoir tanks, foot (treadle) and dash valves, tractor protection valve and the chassis air lines along the frame. Mostly DOT push-in and PTC/PTCR push-to-connect into valve and tank ports, with copper-tubing compression on lines near heat.

Tractor–trailer coupling

Between tractor and trailer

The red supply and blue service coiled lines that hang between cab and trailer, their gladhand couplings and the shut-off valves behind the cab — the joints a driver connects and disconnects every working day, and the first place fleets look when a trailer loses air.

Trailer

On the trailer — brakes & suspension

Trailer air tanks, relay and emergency valves, spring brake chambers, ABS modulator valves, and the air suspension and lift-axle lines at the bogie. Nylon-tubing fittings dominate here; bulkhead fittings pass the lines through the trailer frame and floor.

Service brakes

Brake chambers & ABS

Service and spring brake chambers on every axle, and the ABS modulator valves beside them, are plumbed in nylon tube with push-to-connect or compression fittings — the joints that have to hold at full system pressure, stop after stop.

Air suspension

Suspension, lift axles & accessories

Height-control valves, air bags, lift-axle controls, sliding-tandem locking pins, air horns, cab air seats and fifth-wheel slide cylinders — the auxiliary air circuits on the same tractor and trailer, fed from the same fitting families.

Workshop & fleet

Who buys them

Truck and trailer OEMs, fleet workshops, trailer builders and the distributors who keep their parts walls stocked — by model number and tube size, in inch sizes and NPT/NPTF threads, which is exactly how this catalogue is organised.

Featured: PTC & PTCR composite push-to-connect

The series truck and trailer buyers in the US, Canada and Australia ask for by Parker-style numbers — unions, tees, elbows and the PTCR rigid-swivel elbows for tight ports on trailer valves, air tanks and brake chambers. Select a model on its page, pick a size, and it is carried into the inquiry form automatically.

See all products →

Three things this site does that most supplier sites don't

1 · Cross-referenceEnter the part number you buy today — e.g. AQ62DOT, 62PMT or 271AB — and find the WAVE model it maps to. Try it →
2 · Size carried into the inquiryPick a tube size and thread on the product page; the inquiry form arrives pre-filled with that exact model and size. No re-typing, no wrong-size quotes.
3 · Honest standardsWe write “Built to Standard” and name the standard per family. We do not print certificate numbers we cannot show you.

Catalogues — one per fitting family

Buyers work from catalogues, so each family below has its own catalogue — the category page carries that family's models, full per-model size tables and standards line. The figures in the catalogues and on these pages come from one source, so a number you read in the catalogue is the number you read here. Request the current catalogue PDF for any family in an inquiry and we send it.

Catalogue (PDF)CoversSize tablesGet it
PTC & PTCR Composite Push-to-Connect32PTC · 362PTC · 364PTC · 369PTC · 370PTCR · 371PTC · 379PTC…PART# × tube O.D. × thread × dimensionsCategory page →
DOT Push-In Fittings (Brass)1562-DOT · 1564 · 1565 · 1571 · 1572 familiesPART# × tube O.D. × thread × dimensionsCategory page →
DOT Nylon Tubing Fittings1462 · 1464 · 1469 · 1471 · 1472 · 1480 familiesPART# × tube O.D. × thread × dimensionsCategory page →
DOT Copper Tubing Fittings1362 · 1364 · 1366 · 1368 · 1369 · 1371 · 1380 familiesPART# × tube O.D. × thread × dimensionsCategory page →
Compression Fittings62 · 64 · 66 · 68 · 72 · 79 familiesPART# × tube O.D. × thread × dimensionsCategory page →
Hose Barb FittingsRigid & swivel adapters, elbows, tees, splicersPART# × hose I.D. × thread × dimensionsCategory page →
Push-On Hose Fittings272-series male pipe, SAE 45° / JIC 37° / ball-seat swivelsPART# × hose I.D. × thread × dimensionsCategory page →
SAE Pipe Fittings & 45° FlareNipples, bushings, plugs, caps, couplings, elbows, tees, crosses, wyesPART# × thread / flare × dimensionsCategory page →

WAVE publishes its own catalogue data only — no competitor figures are reproduced.

Guides — specify DOT fittings with confidence

Two pillar guides to start: how the US DOT system differs from the European DIN system, and how to choose a DOT fitting by tube, thread and configuration.

All guides →

Complete the air brake circuit

Fittings are the entry point. The same factory programme also covers PA12 nylon tubing (SAE J844) and air brake hose assemblies — add them to the same inquiry and quote them together.