Home / Standards
Standards — what “Built to Standard” means here
Each WAVE DOT family is designed and tested to the standard named for that family. We publish the standard, not a certificate number: test documents we actually hold are sent on inquiry.
| Standard | Applies to | What it covers |
|---|---|---|
| FMVSS 571.106 | All DOT air brake families | US federal performance requirements for truck and trailer brake hoses, assemblies and end fittings. |
| SAE J844 | Nylon tubing & fittings for it | Non-metallic air brake system tubing — Type A & B nylon tubing the fittings are compatible with. |
| SAE J2494 / J2494-3 | DOT push-in & PTC/PTCR push-to-connect | Push-to-connect tube fittings for truck air brake systems. |
| SAE J246 | Copper-tubing & flare fittings | Spherical and inverted flare tube fittings for copper air brake lines. |
| SAE J512 | SAE 45° flare fittings | Automotive tube fittings, including the 45° flare form used across the SAE pipe & flare family. |
| SAE J1131 | Air brake fittings (Americas catalogue) | Performance requirements for air brake system components. |
The standards line for each family
Every category page and catalogue carries the same standards line for its family — one source of truth, so the web copy and the catalogue can never disagree. Lines marked “confirm” are verified against the factory catalogue before the live site publishes them; nothing is printed in the meantime.
| Family | Standards line (Built to Standard) |
|---|---|
| DOT Push-In (Brass), 1562-DOT | FMVSS 571.106 · SAE J2494 / J2494-3 |
| PTC & PTCR Composite Push-to-Connect | FMVSS 571.106 · SAE J2494-3 |
| DOT Nylon Tubing | FMVSS 571.106 · SAE J844 Type A & B · SAE J1131 (1462 family) |
| DOT Copper Tubing | FMVSS 571.106 · SAE J246 |
| Compression | SAE J512 |
| SAE Pipe Fittings & 45° Flare | SAE J530 / J531 (pipe) · SAE J512 / J513 (flare) |
| Hose Barb | No separate standard claimed — specification confirmed at inquiry |
| Push-On | No separate standard claimed — specification confirmed at inquiry |
How to read a WAVE size table
On the live site, every product page carries a per-model size table in the format PART# × tube size × dimensions, with a thread column added on threaded variants only — the format buyers already know from the leading DOT catalogues. WAVE defines every column on the page; a column that has no values for a family is removed, never left empty.
Column key: PART# = the WAVE part number for that exact variant · Tube O.D. = outside diameter of the tubing (or Hose I.D. = inside diameter of the hose) · Thread = the port thread, NPT/NPTF or metric (listed only on variants that carry a thread — tube-to-tube variants are tabled separately, without a Thread column) · C = wrench flats across the hex · L = overall length · further letters (M / N / D) are defined in the legend printed under each table, next to the factory drawing supplied with your quotation. Per-model dimension values come from the WAVE factory catalogue only.