Request a Quote

Home / Products / DOT Copper Tubing Fittings / Air Brake Copper Tubing Female

Air Brake Copper Tubing Female — representative product photo, full product on white background
DOT Copper Tubing

Air Brake Copper Tubing Female

1366 · Brass / composite programme · Built to FMVSS 571.106 · SAE J246 · for copper air brake tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Air Brake Connectors1 is a connector in WAVE's DOT Copper Tubing family. It connects a line end to its port in one piece, in the form its name describes. The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired. It is made for 1/4″ – 3/4″ tube, with a threaded end in the NPTF 1/8″ – 1/2″ range. Family working range: 150 psi, −65°F to +250°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Air Brake Connectors1
Model1366
FeaturesBrass Body; Meets D.O.T. FMVSS571.106 Performance; Meets functional Requirements SAE J246; Reusable; Optional Pre-applied Thread Sealant; Nickel Plated Versions Available for Bio-diesel
MaterialBrass body (nickel-plated versions available)
StandardDOT FMVSS 571.106; SAE J246;Meets D.O.T. FMVSS571.106 Performance;Meets functional Requirements SAE J246
Compatible tubingCopper Air Brake Tubing;SAE J844 Type A & B nylon tubing with tube support
Reference Part No.66AB - 1366 - 266A

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Air Brake Connectors1

PART#TUBE O.D × MALE NPTFCDM
1366-4A1/4×1/89/16.219.84
1366-4B1/4×1/411/16.3121.07
1366-6A3/8×1/89/16.2191.00
1366-6B3/8×1/411/16.3121.18
1366-6C3/8×3/87/8.4381.18
1366-8C1/2×3/87/8.4381.27
1366-8D1/2×1/21-1/16.5621.44
1366-10C5/8×3/87/8.4381.31
1366-10D5/8×1/21-1/16.5621.50

Dimensions are reference data — please confirm at inquiry.

Features
  • Connects a line end to its port in one piece
  • Ends: Compression tube end (nut & sleeve) × threaded port end
  • The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired.
  • Sleeve-and-nut joint — no flaring
  • This page covers DOT Air Brake Connectors1 (1366) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Air Brake Connectors1 — It connects a line end to its port in one piece, in the form its name describes. In WAVE's DOT Copper Tubing family it serves: Copper air brake lines · compressor discharge lines near heat · tractor engine-bay air lines · legacy copper-plumbed trailers.

Compatible tubing

For DOT Air Brake Connectors1, the compatible line is: Copper air brake tubing, 1/4″–3/4″ O.D.. The tube end of this connector takes that line (1/4″ – 3/4″); the threaded end (NPTF 1/8″ – 1/2″) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: the 1371 family is published with 271AB — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Copper Tubing Fittings