Request a Quote

Home / Products / DOT Copper Tubing Fittings / Air Brake Tubing Male Adapter

Air Brake Tubing Male Adapter — representative product photo, full product on white background
DOT Copper Tubing

Air Brake Tubing Male Adapter

1368 · Brass / composite programme · Built to FMVSS 571.106 · SAE J246 · for copper air brake tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Air Line Adapters1 is a adapter in WAVE's DOT Copper Tubing family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired. It is made for 1/4″ – 3/4″ tube, with a threaded end in the NPTF 1/8″ – 1/2″ range. Family working range: 150 psi, −65°F to +250°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Air Line Adapters1
Model1368
FeaturesBrass Body; Meets D.O.T. FMVSS571.106 Performance; Meets functional Requirements SAE J246; Reusable; Optional Pre-applied Thread Sealant; Nickel Plated Versions Available for Bio-diesel
MaterialBrass body (nickel-plated versions available)
StandardDOT FMVSS 571.106; SAE J246 (Ref.SAE No.120102 BA);Meets D.O.T. FMVSS571.106 Performance;Meets functional Requirements SAE J246
Compatible tubingCopper Air Brake Tubing;SAE J844 Type A & B nylon tubing with tube support
Reference Part No.68AB - 1368 - 268A - S268AB

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Air Line Adapters1

PART#TUBE O.D × MALE NPTFCDM
1368-4A1/4×1/87/16.219.88
1368-4B1/4×1/49/16.3121.09
1368-4C1/4×3/811/16.4381.12
1368-6A3/8×1/89/16.2191.02
1368-6B3/8×1/49/16.3121.20
1368-6C3/8×3/811/16.4381.23
1368-6D3/8×1/27/8.5621.42
1368-8B1/2×1/411/16.3121.32
1368-8C1/2×3/811/16.4381.32
1368-8D1/2×1/27/8.5621.51
1368-10C5/8×3/813/16.4381.38
1368-10D5/8×1/27/8.5621.57
1368-10E5/8×3/41-1/16.7501.63
1368-12D3/4×1/21".5621.67
1368-12E1/2×3/41-1/16.7501.70

*Ref.SAE No.120102 BA

Dimensions are reference data — please confirm at inquiry.

Features
  • Bridges a line end and a threaded port in one piece
  • Ends: Compression tube end (nut & sleeve) × threaded port end
  • The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired.
  • Sleeve-and-nut joint — no flaring
  • This page covers DOT Air Line Adapters1 (1368) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Air Line Adapters1 — It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. In WAVE's DOT Copper Tubing family it serves: Copper air brake lines · compressor discharge lines near heat · tractor engine-bay air lines · legacy copper-plumbed trailers.

Compatible tubing

For DOT Air Line Adapters1, the compatible line is: Copper air brake tubing, 1/4″–3/4″ O.D.. The tube end of this adapter takes that line (1/4″ – 3/4″); the threaded end (NPTF 1/8″ – 1/2″) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: the 1371 family is published with 271AB — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Copper Tubing Fittings