Request a Quote

Home / Products / DOT Copper Tubing Fittings / Air Brake Copper Tubing Male Branch Tee

Air Brake Copper Tubing Male Branch Tee — representative product photo, full product on white background
DOT Copper Tubing

Air Brake Copper Tubing Male Branch Tee

1372 · Brass / composite programme · Built to FMVSS 571.106 · SAE J246 · for copper air brake tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

DOT Air Brake Tee3 is a tee in WAVE's DOT Copper Tubing family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired. It is threadless — its ends take 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: 150 psi, −65°F to +250°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — DOT Air Brake Tee3
Model1372
FeaturesBrass Body; Meets D.O.T. FMVSS571.106 Performance; Meets functional Requirements SAE J246; Reusable; Optional Pre-applied Thread Sealant; Nickel Plated Versions Available for Bio-diesel
MaterialBrass body (nickel-plated versions available)
StandardDOT FMVSS 571.106; SAE J246;Meets D.O.T. FMVSS571.106 Performance;Meets functional Requirements SAE J246
Compatible tubingCopper Air Brake Tubing;SAE J844 Type A & B nylon tubing with tube support
Reference Part No.272AB - 1372

Dimensions are reference data — please confirm at inquiry.

Size table — DOT Air Brake Tee3

PART#TUBE O.D × MALE NPTFMND
1372-4A1/4×1/8.62.66.219
1372-4B1/4×1/4.68.87.312
1372-8A3/8×1/8.72.75.219
1372-6B3/8×1/4.79.92.312
1372-6C3/8×3/8.84.91.438
1372-8C1/2×3/8.93.99.438
1372-8D1/2×1/21.031.18.562

Dimensions are reference data — please confirm at inquiry.

Features
  • Three ports — a run and a branch — so one line can feed two
  • Ends: Compression tube end (nut & sleeve) × 3 — threadless: no thread anywhere on this part
  • The brass nut and sleeve compress directly onto the copper tube — the traditional sleeve-and-nut joint, reusable when a copper line is repaired.
  • Sleeve-and-nut joint — no flaring
  • This page covers DOT Air Brake Tee3 (1372) — select its size above and that exact variant is carried into the inquiry
Applications

DOT Air Brake Tee3 — It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. In WAVE's DOT Copper Tubing family it serves: Copper air brake lines · compressor discharge lines near heat · tractor engine-bay air lines · legacy copper-plumbed trailers.

Compatible tubing

For DOT Air Brake Tee3, the compatible line is: Copper air brake tubing, 1/4″–3/4″ O.D.. Every end of this tee takes that line directly (1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: the 1371 family is published with 271AB — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Copper Tubing Fittings