- Bridges a line end and a threaded port in one piece
- Ends: Hose barb end × threaded port end
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers 90 Degree Brass Fitting Bubble Barb Adapter (29) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / Mini Hose Barb Male Elbow

Hose Barb
Mini Hose Barb Male Elbow
About this fitting
90 Degree Brass Fitting Bubble Barb Adapter is a adapter in WAVE's Hose Barb family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a threaded end in the NPT / NPTF 1/8″ – 1/2″ range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — 90 Degree Brass Fitting Bubble Barb Adapter | |
|---|---|
| Model | 29 |
| Features | Compact; One piece; No clamp required; Good vibration resistance |
| Material | Brass (per description text 'This brass elbow'; features list does not state material) |
| Compatible tubing | Polyethylene |
Size table — 90 Degree Brass Fitting Bubble Barb Adapter
| PART# | HOSE O.D×MALE THARED | D | M | N |
|---|---|---|---|---|
| 29-5/32A | 5/32×1/8 | .062 | .56 | .63 |
| 29-4-1 | 1/4×1/16 | .120 | .62 | .60 |
| 29-4A | 1/4×1/8 | .120 | .69 | .63 |
| 29-4B | 1/4×1/4 | .120 | .72 | .72 |
| 29-6A | 3/8×1/8 | .187 | .69 | .69 |
| 29-6B | 3/8×1/4 | .187 | .75 | .75 |
| 28-8B | 1/2×1/4 | .312 | .94 | .74 |
| 28-8C | 1/2×3/8 | .312 | .94 | .81 |
Features
Applications
Compatible tubing



