Request a Quote

Home / Products / Compression Fittings / Brass Compression Sleeve

Brass Compression Sleeve — representative product photo, full product on white background
Compression

Brass Compression Sleeve

60 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Compression Sleeve1 is a compression sleeve in WAVE's Compression family. It is the ferrule of a compression joint: the nut drives it onto the tube, where it bites and seals. It is a component, ordered for the tube size it fits. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is a component of the family's compression joint, sized by the tube it serves: 1/8″ – 3/4″. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Compression Sleeve1
Model60
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid (Ref.SAE No.060115);Meets functional requirements of SAE J-512
Reference Part No.60 - 260 - s60 - 60A

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Compression Sleeve1

PART#TUBE SIZE O.DADL
60-21/8.187.130.19
60-33/16.266.192.22
60-41/4.344.255.25
60-55/16.406.318.25
60-63/8.469.382.25
60-77/16.531.444.31
60-81/2.594.507.38
60-105/8.719.632.38
60-123/4.875.758.44

*Ref.SAE No.060115

Dimensions are reference data — please confirm at inquiry.

Features
  • The ferrule of the joint — the nut drives it onto the tube, where it bites and seals
  • Ends: Component — sits on the tube, under the compression nut — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Brass Compression Sleeve1 (60) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Compression Sleeve1 — It is the ferrule of a compression joint: the nut drives it onto the tube, where it bites and seals. It is a component, ordered for the tube size it fits. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Brass Compression Sleeve1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. This component is sized by that tube (1/8″ – 3/4″) — order it for the tube it serves.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings