Request a Quote

Home / Products / Compression Fittings / Compression Fittings Brass 45° Male Elbow

Compression Fittings Brass 45° Male Elbow — representative product photo, full product on white background
Compression

Compression Fittings Brass 45° Male Elbow

79 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Compression Elbows1 is a elbow in WAVE's Compression family. It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Compression Elbows1
Model79
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid (Ref.SAE No.060302 BA);Meets functional requirements of SAE J-512
Reference Part No.273 - 179C - 74 - 77 - 6945

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Compression Elbows1

PART#TUBE O.D × MALE NPTFNMD
79-3A3/16×1/8.61.43.125
79-4A1/4×1/8.61.43.189
79-4B1/4×1/4.83.59.189
79-5A5/16×1/8.66.66.234
79-5B5/16×1/4.83.66.250
79-6A3/8×1/8.66.62.312
79-6B3/8×1/4.83.62.312
79-6C3/8×3/8.88.75.312
79-8C1/2×3/8.94.75.406
79-8D1/2×1/21.13.94.406

*Ref.SAE No.060302 BA

Dimensions are reference data — please confirm at inquiry.

Features
  • Turns the line through 90° in a compact body
  • Ends: Compression tube end (nut & sleeve) × Compression tube end (nut & sleeve) — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Brass Compression Elbows1 (79) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Compression Elbows1 — It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Brass Compression Elbows1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. Every end of this elbow takes that line directly (1/8″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings