Request a Quote

Home / Products / Compression Fittings / Brass Union Tee Compression Fittings

Brass Union Tee Compression Fittings — representative product photo, full product on white background
Compression

Brass Union Tee Compression Fittings

64 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Compression Tee1 is a tee in WAVE's Compression family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Compression Tee1
Model64
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (brass or acetal sleeve available)
StandardSAE J-512; UL Listed for flammable liquid (Ref.SAE No.060401 BA);Meets functional requirements of SAE J-512
Reference Part No.64 - 164C - S64 - 64A

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Compression Tee1

PART#TUBE SIZE O.DMMD
64-21/8/.53.94
64-33/16/.59.125
64-41/4/.627.188
64-55/16/.65.250
64-63/8/.73.312
64-81/2/.94.406
64-105/8/1.06.500
PART#TUBE SIZEM1M2M3
64-4-4-61/4x1/4x3/8.69.69.75
64-4-6-41/4x3/8x1/4.69.75.69
64-6-6-43/8x3/8x1/4.75.75.69
64-8-8-61/2x1/2x3/8.94.94.81
64-10-10-85/8x5/8x1/21.061.061.06

*Ref.SAE No.060401 BA

Note: in the source size table the D value for part 64-2 is printed as .94, out of step with the other D values in the same column — please confirm it at inquiry.

Dimensions are reference data — please confirm at inquiry.

Features
  • Three ports — a run and a branch — so one line can feed two
  • Ends: Compression tube end (nut & sleeve) × 3 — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Brass Compression Tee1 (64) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Compression Tee1 — It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Brass Compression Tee1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. Every end of this tee takes that line directly (1/8″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings