Request a Quote

Home / Products / Compression Fittings / Forged 90° Female Elbow Compression Fittings

Forged 90° Female Elbow Compression Fittings — representative product photo, full product on white background
Compression

Forged 90° Female Elbow Compression Fittings

70 · Brass / composite programme · Brass compression programme · SAE J246 flare/compression practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Compression Brass Elbow1 is a elbow in WAVE's Compression family. It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade. It is threadless — its ends take 1/8″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: By tubing used — confirmed at inquiry, By tubing used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Compression Brass Elbow1
Model70
FeaturesMeets functional requirements of SAE J-512; UL Listed for flammable liquid; Brass or acetal sleeve available; No tube preparation; Forged and extruded shapes
MaterialBrass (forged brass or acetal sleeve)
StandardSAE J-512 (Ref.SAE No.060203 BA);Meets functional requirements of SAE J-512;UL Listed for flammable liquid
Reference Part No.70 - 170C - S70 - 70A

Dimensions are reference data — please confirm at inquiry.

Size table — Compression Brass Elbow1

PART#TUBE O.D x FEMALR NPTFNMD
70-3A3/16x1/8.470.69.125
70-4A1/4x1/8.470.69.188
70-4B1/4x1/4.562.75.188
70-5A5/16x1/8.600.78.234
70-5B5/16x1/4.562.78.250
70-6B3/8x1/4.580.81.312
70-6C3/8x3/8.580.88.312
70-8B1/2x1/4.7001.00.312
70-8C1/2x3/8.7001.00.406
70-8D1/2x1/2.8801.00.406

*Ref.SAE No.060203 BA

Dimensions are reference data — please confirm at inquiry.

Features
  • Turns the line through 90° in a compact body
  • Ends: Compression tube end (nut & sleeve) × Compression tube end (nut & sleeve) — threadless: no thread anywhere on this part
  • The brass nut and sleeve make the seal mechanically on the tube — no flaring, no soldering — and the joint can be undone and remade.
  • Mechanical seal — no flaring, no soldering
  • This page covers Compression Brass Elbow1 (70) — select its size above and that exact variant is carried into the inquiry
Applications

Compression Brass Elbow1 — It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. In WAVE's Compression family it serves: Air, water and low-pressure hydraulic lines · instrumentation · lubrication lines · workshop air.

Compatible tubing

For Compression Brass Elbow1, the compatible line is: Copper, nylon and plastic tubing, 1/8″–3/4″ O.D.. Every end of this elbow takes that line directly (1/8″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Compression Fittings