- Three ports — a run and a branch — so one line can feed two
- Ends: Hose barb end × 3 — threadless: no thread anywhere on this part
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers Brass Tee Fitting Hose Barb Tee1 (123) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / 123 Brass Hose Barb Tee Fitting

Hose Barb
123 Brass Hose Barb Tee Fitting
About this fitting
Brass Tee Fitting Hose Barb Tee1 is a tee in WAVE's Hose Barb family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is threadless — its ends take Hose I.D. 1/4″ – 3/4″ hose directly, with no thread anywhere on the part. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Tee Fitting Hose Barb Tee1 | |
|---|---|
| Model | 123 |
| Features | All brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required |
| Material | Brass; fluorocarbon O-rings |
| Compatible tubing | Rubber Hose;GPH Hose |
| Reference Part No. | 32367~32353 |
Size table — Brass Tee Fitting Hose Barb Tee1
| PART# | Hose I.D × Hose I.D | C | D | M | L |
|---|---|---|---|---|---|
| 123-3 | 3/16 | 5/16 | .125 | .63 | 1.00 |
| 123-4 | 1/4 | 3/8 | .187 | .63 | 1.00 |
| 123-5 | 5/16 | 7/16 | .250 | .63 | 1.00 |
| 123-6 | 3/8 | 1/2 | .281 | .63 | 1.01 |
| 123-8 | 1/2 | 5/8 | .375 | .65 | 1.26 |
| 123-10 | 5/8 | 3/4 | .530 | .87 | 1.26 |
| 123-12 | 3/4 | 7/8 | .790 | .87 | 1.45 |
Features
Applications
Compatible tubing



