- Bridges a line end and a threaded port in one piece
- Ends: Hose barb end × male thread
- The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
- Rigid and swivel ends
- This page covers Brass Push On Connector Male Adapter2 (125) — select its size above and that exact variant is carried into the inquiry
Home / Products / Hose Barb Fittings / Hose Barb to Male Pipe

Hose Barb
Hose Barb to Male Pipe
About this fitting
Brass Push On Connector Male Adapter2 is a adapter in WAVE's Hose Barb family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT / NPTF 1/8″ – 1/2″ range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Push On Connector Male Adapter2 | |
|---|---|
| Model | 125 |
| Features | All brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required |
| Material | Brass; fluorocarbon O-rings |
| Compatible tubing | Rubber Hose;GPH Hose |
| Reference Part No. | PGH - 101 - 102 - 210A - 125HBL - 105B-1 - KF-PS - MPB |
Size table — Brass Push On Connector Male Adapter2
| PART# | Hose I.D×Thared | C | D | M | L |
|---|---|---|---|---|---|
| 125-2A | 1/8×1/8 | 7/16 | .093 | .50 | 1.01 |
| 125-3A | 3/16×1/8 | 7/16 | .125 | .70 | 1.17 |
| 125-3B | 3/16×1/4 | 9/16 | .125 | .70 | 1.21 |
| 125-4A | 1/4×1/8 | 7/16 | .187 | .97 | 1.54 |
| 125-4B | 1/4×1/4 | 9/16 | .187 | .97 | 1.72 |
| 125-4C | 1/4×3/8 | 11/16 | .187 | .97 | 1.71 |
| 125-4D | 1/4×1/2 | 7/8 | .187 | .87 | 1.72 |
| 125-5A | 5/16×1/8 | 7/16 | .250 | .97 | 1.54 |
| 125-5B | 5/16×1/4 | 9/16 | .250 | .97 | 1.72 |
| 125-5C | 5/16×3/8 | 11/16 | .250 | .97 | 1.71 |
| 125-6A | 3/8×1/8 | 7/16 | .281 | .97 | 1.53 |
| 125-6B | 3/8×1/4 | 9/16 | .281 | .97 | 1.75 |
| 125-6C | 3/8×3/8 | 11/16 | .281 | .97 | 1.71 |
| 125-6D | 3/8×1/2 | 7/8 | .281 | .97 | 1.86 |
| 125-8B | 1/2×1/4 | 9/16 | .375 | .97 | 1.72 |
| 125-8C | 1/2×3/8 | 11/16 | .375 | .97 | 1.72 |
| 125-8D | 1/2×1/2 | 7/8 | .375 | .97 | 1.86 |
| 125-8E | 1/2×3/4 | 1-1/16 | .375 | .97 | 1.94 |
| 125-10C | 5/8×3/8 | 11/16 | .468 | .97 | 1.76 |
| 125-10D | 5/8×1/2 | 7/8 | .468 | .97 | 1.86 |
| 125-10E | 5/8×3/4 | 1-1/16 | .468 | .97 | 1.87 |
| 125-12D | 3/4×1/2 | 7/8 | .562 | .97 | 1.79 |
| 125-12E | 3/4×3/4 | 1-1/16 | .562 | .97 | 1.87 |
| 125-16E | 1"×3/4 | 1-1/16 | .875 | 1.18 | 2.08 |
| 125-16H | 1"×1" | 1-3/8 | .875 | 1.18 | 2.34 |
Features
Applications
Compatible tubing



