Request a Quote

Home / Products / Hose Barb Fittings / 128SV Hose Barb to Swivel Female Ball-End

128SV Hose Barb to Swivel Female Ball-End — representative product photo, full product on white background
Hose Barb

128SV Hose Barb to Swivel Female Ball-End

128SV · Brass / composite programme · Brass hose-end programme · swivel ends to JIC 37° / SAE 45° practice.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Hose Fittings Welding Hose Connector Stem Only1 is a stem elbow in WAVE's Hose Barb family. One end is a plain stem that plugs into another push-in fitting, the other a tube socket — it turns a run 90° without any thread at all. The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration. It is threadless — its ends take Hose I.D. 1/4″ – 3/4″ hose directly, with no thread anywhere on the part. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Hose Fittings Welding Hose Connector Stem Only1
Model128SV
FeaturesAll brass construction; Fluorocarbon O-rings; NPTF, SAE straight thread, metric thread ends; Reusable; Clamp required
MaterialBrass; fluorocarbon O-rings
Compatible tubingRubber Hose;GPH Hose
Reference Part No.128SV - 29FS - 209AS - 124 - 131

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Hose Fittings Welding Hose Connector Stem Only1

PART#HOSE I.D×NPSMCDML
128SV-3A3/16×1/81/2.187.751.18
128SV-4A1/4×1/81/2.187.971.40
128SV-4B1/4×1/45/8.187.971.50
128SV-4C1/4×3/83/4.187.971.58
128SV-5B5/16×1/45/8.250.971.50
128SV-5C5/16×3/83/4.250.971.58
128SV-6B3/8×1/45/8.281.971.63
128SV-6C3/8×3/83/4.281.971.50
128SV-6D3/8×1/215/16.281.971.65
128SV-8C1/2×3/83/4.375.971.55
128SV-8D1/2×1/215/16.375.971.65

Dimensions are reference data — please confirm at inquiry.

Features
  • Plain stem at one end plugs into another push-in fitting — a 90° turn with no thread at all
  • Ends: Tube stem × push-in tube socket — threadless: no thread anywhere on this part
  • The hose is pushed over the sharp barbs and clamped; the barb profile bites the hose bore so the joint holds under vibration.
  • Rigid and swivel ends
  • This page covers Brass Hose Fittings Welding Hose Connector Stem Only1 (128SV) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Hose Fittings Welding Hose Connector Stem Only1 — One end is a plain stem that plugs into another push-in fitting, the other a tube socket — it turns a run 90° without any thread at all. In WAVE's Hose Barb family it serves: Rubber air and water hose · welding hose · workshop and fleet hose assemblies.

Compatible tubing

For Brass Hose Fittings Welding Hose Connector Stem Only1, the compatible line is: Rubber hose, 1/4″–3/4″ I.D. — clamp joint. Every end of this stem elbow takes that line directly (Hose I.D. 1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Hose Barb Fittings