Request a Quote

Home / Products / DOT Push-In Fittings (Brass) / D.O.T Male Branch Tee Adapter

D.O.T Male Branch Tee Adapter — representative product photo, full product on white background
DOT Push-In (Brass)

D.O.T Male Branch Tee Adapter

1572 · Brass / composite programme · Built to FMVSS 571.106 · SAE J2494 · for SAE J844 Type A & B nylon tubing.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass DOT Tee Fittings2 is a tee in WAVE's DOT Push-In (Brass) family. It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service. It is threadless — its ends take 1/4″ – 3/4″ tube directly, with no thread anywhere on the part. Family working range: 250 psi, −40°F to +200°F. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass DOT Tee Fittings2
Model1572
FeaturesBrass Collet; Buna N O-ring; Stainless Steel Tube Support; Meets D.O.T. FMVSS571.106; Meets SAE J2494 & SAE J2494-3
MaterialBrass collet, Buna N O-ring, stainless steel tube support
StandardDOT FMVSS571.106; SAE J2494 & SAE J2494-3;Meets D.O.T. FMVSS571.106;Meets SAE J2494 & SAE J2494-3
Compatible tubingSAE J844 Type A & B nylon tubing
Reference Part No.AQ72DOT - 172PMT - 1872 - DQ72DOT - 1572DOT

Dimensions are reference data — please confirm at inquiry.

Size table — Brass DOT Tee Fittings2

PART#TUBE O.D ×MALE NPTFCMN
1572-DOT-4A1/4×1/83/8.88.75
1572-DOT-4B1/4×1/43/8.92.92
1572-DOT-6B3/8×1/41/2.981.00
1572-DOT-6C3/8×3/81/2.98.99
1572-DOT-8B1/2×1/45/81.151.05
1572-DOT-8C1/2×3/85/81.151.05

Dimensions are reference data — please confirm at inquiry.

Features
  • Three ports — a run and a branch — so one line can feed two
  • Ends: Push-in tube socket × 3 — threadless: no thread anywhere on this part
  • The all-brass body and collet grip SAE J844 nylon tube over a stainless support, with a Buna-N seal — push in to seal, pull the collet to release for service.
  • Buna-N O-ring seal
  • This page covers Brass DOT Tee Fittings2 (1572) — select its size above and that exact variant is carried into the inquiry
Applications

Brass DOT Tee Fittings2 — It splits one air line into two, or merges two into one, with three tube ends — the standard way to feed two brake chambers or valves from a single supply line. In WAVE's DOT Push-In (Brass) family it serves: Tractor and trailer air lines · valves and air tanks · brake chambers · frame-to-axle runs · dash controls.

Compatible tubing

For Brass DOT Tee Fittings2, the compatible line is: SAE J844 Type A & B nylon air brake tubing, 1/4″–3/4″ O.D.. Every end of this tee takes that line directly (1/4″ – 3/4″) — there is no threaded port in the joint.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: the 1562-DOT family is published with AQ62DOT · 62PMT · 1862 · DQ62DOT — check your number in the cross-reference. “Replacement for” describes fit and function only.

Related products — same family

← Back to DOT Push-In Fittings (Brass)