Request a Quote

Home / Products / Push-On Hose Fittings / 284 Push‑on Hose Barb to Female SAE 45° Swivel

284 Push‑on Hose Barb to Female SAE 45° Swivel — representative product photo, full product on white background
Push-On

284 Push‑on Hose Barb to Female SAE 45° Swivel

284 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Barbed Brass Fitting Female Ballseat Swivel Adapter1 is a swivel adapter in WAVE's Push-On family. The swivel end lets the nut turn while the body stays put, so the joint can be tightened without twisting the hose or tube behind it. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a female thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Barbed Brass Fitting Female Ballseat Swivel Adapter1
Model284
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.100S-4 - KA-NS - 684 - 934 - HSF - 284 - 307 - 29AEPO - P990-H - 728 - 30882
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Barbed Brass Fitting Female Ballseat Swivel Adapter1

PART#HOSE I.D×45° Female FlareUNF ThreadCML
284-4-41/4×1/47/16-207/16.771.45
284-4-51/4×5/161/2-205/8.771.59
284-4-61/4×3/85/8-183/4.771.60
284-5-55/16×5/161/2-205/8.871.60
284-5-65/16×3/85/8-183/4.871.60
284-6-63/8×3/85/8-183/4.871.75
284-6-83/8×1/23/4-167/8.871.85
284-8-61/2×3/85/8-183/41.051.85
284-8-81/2×1/23/4-167/81.451.77
284-10-105/8×5/87/8-141"1.002.35
284-12-123/4×3/41-1/16-141"-1/41.452.42

Dimensions are reference data — please confirm at inquiry.

Features
  • The swivel end turns while the body stays put, so the line behind it is not twisted
  • Ends: Hose barb end × female swivel thread
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Barbed Brass Fitting Female Ballseat Swivel Adapter1 (284) — select its size above and that exact variant is carried into the inquiry
Applications

Barbed Brass Fitting Female Ballseat Swivel Adapter1 — The swivel end lets the nut turn while the body stays put, so the joint can be tightened without twisting the hose or tube behind it. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Barbed Brass Fitting Female Ballseat Swivel Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this swivel adapter takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings