Request a Quote

Home / Products / Push-On Hose Fittings / 290 Inverted Flare Male Swivel Push-on

290 Inverted Flare Male Swivel Push-on — representative product photo, full product on white background
Push-On

290 Inverted Flare Male Swivel Push-on

290 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Adapter Male Inverted Flare Adapter1 is a adapter in WAVE's Push-On family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Adapter Male Inverted Flare Adapter1
Model290
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.290 - 100B-B KA-MF - 1MS - 947
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Adapter Male Inverted Flare Adapter1

PART#HOSE ID×TUBE O.DTHRTAD -B-UNFCML
290 - 04031/4x3/16 O.D3/8-24UNF7/16"0.771.52
290 - 04041/4x1/4 0.D7/16-24UNF7/16"0.771.52
290 - 04051/4x5/16 O.D1/2-20UNF1/2"0.771.58
290 - 05055/16x5/16 O.D1/2-20UNF1/2"0.771.58
290 -05065/16x3/8 O.D5/8-18UNF5/8"0.771.63
290 - 06053/8x5/16 O.D1/2-20UNF1/2"0.921.73
290 -06063/8x3/8 O.D5/8-18UNF5/8"0.921.78
290-08081/2x1/2 O.D3/4-18UNF3/4"1.021.96
290-10105x8/5x8 O.D7/8-18UNF7/8"1.52.5

Dimensions are reference data — please confirm at inquiry.

Features
  • Bridges a line end and a threaded port in one piece
  • Ends: Hose barb end × male thread
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Adapter Male Inverted Flare Adapter1 (290) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Adapter Male Inverted Flare Adapter1 — It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Adapter Male Inverted Flare Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this adapter takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings