Request a Quote

Home / Products / Push-On Hose Fittings / 272 Push-on Hose Barb to Male Pipe

272 Push-on Hose Barb to Male Pipe — representative product photo, full product on white background
Push-On

272 Push-on Hose Barb to Male Pipe

272 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Push On Connector Male Adapter1 is a adapter in WAVE's Push-On family. It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Push On Connector Male Adapter1
Model272
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.301 - P990A - 100B-1 - 272 - 29PO - 725 - 625 - 941 - BPN - 30182
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Push On Connector Male Adapter1

PART#HOSE I.D×MALE NPTFCML
272-4A1/4×1/87/16.821.42
272-4B1/4×1/49/16.821.66
272-4C1/4×3/811/16.821.66
272-5A5/16×1/87/16.771.53
272-5B5/16×1/49/16.871.69
272-6A3/8×1/87/16.971.56
272-6B3/8×1/49/16.971.76
272-6C3/8×3/811/16.971.76
272-6D3/8×1/27/8.971.97
272-8B1/2×1/49/16.971.76
272-8C1/2×3/811/16.971.76
272-8D1/2×1/27/8.971.97
272-8E1/2×3/41-1/16.971.97
272-10C5/8×3/811/161.502.34
272-10D5/8×1/27/81.502.45
272-12D3/4×1/27/81.502.87
272-12E3/4×3/41-1/161.502.45

Dimensions are reference data — please confirm at inquiry.

Features
  • Bridges a line end and a threaded port in one piece
  • Ends: Hose barb end × male thread
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Push On Connector Male Adapter1 (272) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Push On Connector Male Adapter1 — It adapts a tube or hose end to a threaded port — the bridge between the line and the component it screws into. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Push On Connector Male Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this adapter takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings