Request a Quote

Home / Products / Push-On Hose Fittings / 273 Push On Hose Barb Fittings Male Elbow

273 Push On Hose Barb Fittings Male Elbow — representative product photo, full product on white background
Push-On

273 Push On Hose Barb Fittings Male Elbow

273 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Push to Connect Male Elbow Adapter1 is a elbow in WAVE's Push-On family. It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Push to Connect Male Elbow Adapter1
Model273
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.273 - 29EPO - 100-C
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Push to Connect Male Elbow Adapter1

PART#HOSE I.D × MLAE NPTFCML
273-4A1/4×1/47/16.771.45
273-4B1/4×5/165/8.771.59
273-4C1/4×3/83/4.771.60
273-5A5/16×5/165/8.871.60
273-5B5/16×3/83/4.871.60
273-5C3/8×3/83/4.871.75
273-6A3/8×1/27/8.871.85
273-6B1/2×3/83/41.051.85
273-6C1/2×1/27/81.451.77
273-7A5/8×5/81"1.002.35
273-7B3/4×3/41'-1/41.452.42

Dimensions are reference data — please confirm at inquiry.

Features
  • Turns the line through 90° in a compact body
  • Ends: Hose barb end × male thread
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Push to Connect Male Elbow Adapter1 (273) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Push to Connect Male Elbow Adapter1 — It turns the line through 90° in a compact body, so a run can change direction in the tight space behind a valve or under a trailer frame. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Push to Connect Male Elbow Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this elbow takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings