Request a Quote

Home / Products / Push-On Hose Fittings / 274 Push-on Hose Barb to Female Pipe

274 Push-on Hose Barb to Female Pipe — representative product photo, full product on white background
Push-On

274 Push-on Hose Barb to Female Pipe

274 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Fitting Adapters Female Rigid Adapter1 is a rigid-swivel elbow in WAVE's Push-On family. The threaded end is rigid once tight, but the body swivels while you fit it, so the tube run can be aimed exactly where the port angle demands — built for tight valve and tank ports. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Fitting Adapters Female Rigid Adapter1
Model274
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.274 - 726 - 940 - HLF - 626 - 29FPO - 30282
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Fitting Adapters Female Rigid Adapter1

PART#HOSE I.D× FEMALE NPTFCML
274-4A1/4×1/81/2.771.35
274-4B1/4×1/45/8.771.51
274-4C1/4×3/83/4.771.51
274-5A5/16×1/81/2.771.32
274-5B5/16×1/45/8.871.51
274-6A3/8×1/87/16.921.47
274-6B3/8×1/45/8.971.61
274-6C3/8X3/83/4.971.63
274-6D3/8×1/215/16.971.66
274-8B1/2×1/49/16.971.76
274-8C1/2×3/83/4.971.63
274-8D1/2×1/215/16.971.76
274-8E1/2×3/41-3/161.022.07
274-10C5/8×3/83/41.502.24
274-10D5/8×1/215/161.502.24
274-12D3/4×1/215/161.502.24
274-12E3/4×3/41-3/161.502.55

Dimensions are reference data — please confirm at inquiry.

Features
  • Thread is rigid once tight; the body swivels while fitting, so the tube run can be aimed at the port
  • Ends: Hose barb end × male thread (rigid swivel)
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Fitting Adapters Female Rigid Adapter1 (274) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Fitting Adapters Female Rigid Adapter1 — The threaded end is rigid once tight, but the body swivels while you fit it, so the tube run can be aimed exactly where the port angle demands — built for tight valve and tank ports. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Fitting Adapters Female Rigid Adapter1, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The hose end of this rigid-swivel elbow takes that line (Hose I.D. 1/4″ – 3/4″); the threaded end (NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels) mates with its port and does not change the line it serves.

The size options at the top of this page list only the sizes this configuration is made in — each threaded option is a tube × thread combination.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings