Request a Quote

Home / Products / Push-On Hose Fittings / 287 SAE/JIC Dual 37°/45° Female Swivel

287 SAE/JIC Dual 37°/45° Female Swivel — representative product photo, full product on white background
Push-On

287 SAE/JIC Dual 37°/45° Female Swivel

287 · Brass / composite programme · Brass push-on programme · for push-on (no-clamp) hose.

This is a representative photo of the series/type — it does not show a specific size. The specification for this product is in the table on this page.

About this fitting

Brass Fitting Dual 45 is a 45° elbow in WAVE's Push-On family. It turns the line through 45° instead of a sharp right angle — used where the run changes direction gradually or a 90° elbow would kink the tube. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is threadless — its ends take Hose I.D. 1/4″ – 3/4″ hose directly, with no thread anywhere on the part. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.

Select a size

Inquire on this modelCross-reference a number
Specification — Brass Fitting Dual 45
Model287
MaterialBrass or stainless steel (page states both; not specified per variant)
Reference Part No.29FDS - 287 - HDF - 309 - 735 - 690 - P990-K - 305 - 935/934
Working pressureLimited by hose l.D

Dimensions are reference data — please confirm at inquiry.

Size table — Brass Fitting Dual 45

PART#HOSE I.D×DUAL SEAT FLARECML
287-4-41/4×7/16-20UNF7/16.871.45
287-4-51/4×1/2-20UNF5/8.871.59
287-5-63/8×1/2-20UNF5/8.921.75
287-6-83/8×3/4-16UNF7/8.921.82
287-8-81/2×3/4-16UNF7/8.971.78
287-8-101/2×7/8-14UNF7/81.021.97
287-10-105/8×7/8-14UNF1"1.002.35

Dimensions are reference data — please confirm at inquiry.

Features
  • Turns the line through 45° where a right angle would kink the tube
  • Ends: As photographed — the exact end configuration is confirmed at inquiry — threadless: no thread anywhere on this part
  • The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
  • No clamp or ferrule needed
  • This page covers Brass Fitting Dual 45 (287) — select its size above and that exact variant is carried into the inquiry
Applications

Brass Fitting Dual 45 — It turns the line through 45° instead of a sharp right angle — used where the run changes direction gradually or a 90° elbow would kink the tube. In WAVE's Push-On family it serves: Low-pressure push-on hose lines · air and fluid transfer in workshop and fleet service.

Compatible tubing

For Brass Fitting Dual 45, the compatible line is: Push-on (no-clamp) hose, 1/4″–3/4″ I.D.. The exact end configuration is confirmed at inquiry; the family line it serves is as stated.

The size options at the top of this page list only the sizes this configuration is made in — this configuration is threadless, so no thread sizes are listed for it.

Reference Part No.: buying this fitting under another brand’s number today? Search the cross-reference — confirmed mappings are labelled; anything unconfirmed is checked against the factory catalogue at inquiry, never guessed.

Related products — same family

← Back to Push-On Hose Fittings