- Thread is rigid once tight; the body swivels while fitting, so the tube run can be aimed at the port
- Ends: Hose barb end × male thread (rigid swivel)
- The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
- No clamp or ferrule needed
- This page covers Brass Barbed Fittings Rigid Tube Adapter1 (294(拟配)) — select its size above and that exact variant is carried into the inquiry
Home / Products / Push-On Hose Fittings / Brass Barbed Fittings Rigid Tube Adapter1

Brass Barbed Fittings Rigid Tube Adapter1
About this fitting
Brass Barbed Fittings Rigid Tube Adapter1 is a rigid-swivel elbow in WAVE's Push-On family. The threaded end is rigid once tight, but the body swivels while you fit it, so the tube run can be aimed exactly where the port angle demands — built for tight valve and tank ports. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Barbed Fittings Rigid Tube Adapter1 | |
|---|---|
| Model | 294(拟配) |
| Material | C36000 |
| Reference Part No. | 294 - 100B-X - KA-RL - 303 - 732 - 694 |
| Working temperature | -40°F to 180°F (-40°C to 82°C) Limited by media through hose assembly |
Size table — Brass Barbed Fittings Rigid Tube Adapter1
| PART# | HOSE I.D × O.D TUBE | M | L |
|---|---|---|---|
| 294-4-3 | 1/4×3/16 | .86 | 1.68 |
| 294-4-4 | 1/4×1/4 | 1.06 | 1.88 |
| 294-4-5 | 1/4×5/16 | 1.06 | 1.88 |
| 294-5-5 | 5/16×5/16 | 1.06 | 1.91 |
| 294-6-6 | 3/8×3/8 | 1.06 | 2.03 |
| 294-8-8 | 1/2×1/2 | 1.06 | 2.13 |
| 294-10-10 | 1/2×5/8 | 1.06 | 2.61 |
| 294-12-12 | 3/4×3/4 | 1.06 | 2.61 |



