- Turns the line through 45° where a right angle would kink the tube
- Ends: Hose barb end × female swivel thread
- The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
- No clamp or ferrule needed
- This page covers Brass Fitting Dual 45deg 37deg Female Swivel Adapter1 — select its size above and that exact variant is carried into the inquiry
Home / Products / Push-On Hose Fittings / Brass Fitting Dual 45deg 37deg Female Swivel Adapter1

Brass Fitting Dual 45deg 37deg Female Swivel Adapter1
About this fitting
Brass Fitting Dual 45deg 37deg Female Swivel Adapter1 is a 45° elbow in WAVE's Push-On family. It turns the line through 45° instead of a sharp right angle — used where the run changes direction gradually or a 90° elbow would kink the tube. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a female thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Fitting Dual 45deg 37deg Female Swivel Adapter1 | |
|---|---|
| Model | To be confirmed at inquiry |
| Material | Brass or stainless steel (page states both; not specified per variant) |
| Reference Part No. | 29FDS - 287 - HDF - 309 - 735 - 690 - P990-K - 305 - 935/934 |
| Working pressure | Limited by hose l.D |
Size table — Brass Fitting Dual 45deg 37deg Female Swivel Adapter1
| PART# | HOSE I.D×DUAL SEAT FLARE | C | M | L |
|---|---|---|---|---|
| 287-4-4 | 1/4×7/16-20UNF | 7/16 | .87 | 1.45 |
| 287-4-5 | 1/4×1/2-20UNF | 5/8 | .87 | 1.59 |
| 287-5-6 | 3/8×1/2-20UNF | 5/8 | .92 | 1.75 |
| 287-6-8 | 3/8×3/4-16UNF | 7/8 | .92 | 1.82 |
| 287-8-8 | 1/2×3/4-16UNF | 7/8 | .97 | 1.78 |
| 287-8-10 | 1/2×7/8-14UNF | 7/8 | 1.02 | 1.97 |
| 287-10-10 | 5/8×7/8-14UNF | 1" | 1.00 | 2.35 |



