- The swivel end turns while the body stays put, so the line behind it is not twisted
- Ends: Hose barb end × male thread
- The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule.
- No clamp or ferrule needed
- This page covers Brass Swivel Fitting Male Swivel Adapter1 — select its size above and that exact variant is carried into the inquiry
Home / Products / Push-On Hose Fittings / Brass Swivel Fitting Male Swivel Adapter1

Brass Swivel Fitting Male Swivel Adapter1
About this fitting
Brass Swivel Fitting Male Swivel Adapter1 is a swivel adapter in WAVE's Push-On family. The swivel end lets the nut turn while the body stays put, so the joint can be tightened without twisting the hose or tube behind it. The barb profile is matched to push-on hose, so the hose pushes on and holds by design — no clamp and no ferrule. It is made for Hose I.D. 1/4″ – 3/4″ hose, with a male thread in the NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels range. Family working range: By hose used — confirmed at inquiry, By hose used — confirmed at inquiry. The exact variant is picked from the size options on this page and confirmed against the factory catalogue at inquiry.
Select a size
| Specification — Brass Swivel Fitting Male Swivel Adapter1 | |
|---|---|
| Model | To be confirmed at inquiry |
| Configuration | Swivel adapter |
| Ends | Hose barb end × male thread |
| Hose I.D. range | Hose I.D. 1/4″ – 3/4″ |
| Thread | Male thread — NPT 1/8″ – 1/2″ · SAE 45° / JIC 37° swivels |
| Status | To be confirmed at inquiry |
Size variants — Brass Swivel Fitting Male Swivel Adapter1
| Variant (PART# · size) | Hose I.D. | Thread | Working pressure | Temperature |
|---|---|---|---|---|
| 3/8″ hose × 1/4 NPT | 3/8″ hose | 1/4 NPT | By hose used — confirmed at inquiry | By hose used — confirmed at inquiry |
| 1/2″ hose × 3/8 NPT | 1/2″ hose | 3/8 NPT | By hose used — confirmed at inquiry | By hose used — confirmed at inquiry |
| 1/2″ hose × 1/2 NPT | 1/2″ hose | 1/2 NPT | By hose used — confirmed at inquiry | By hose used — confirmed at inquiry |
How to read these tables: variants are tabled by structure. Tube-to-tube variants — unions, tees, elbows and the other threadless forms — are listed with tube size, working pressure and temperature only: there is no Thread column, because there is no thread to list. A Thread column appears only on variants that actually carry one — male, female or bulkhead. Pick the row on the product page and that exact size is carried into your inquiry. On the live site, every row also carries its C (wrench flats) and L (overall length) dimensions from the factory drawing, with every column defined on the page; per-model dimension values are WAVE factory-catalogue data, confirmed with your quotation.



